logocree     Logo-Intematix       

Controller and converters

Controllers are intelligent devices, that allow several play of light or LED light-dimming. Converters are devices that convert a kind of signal in another.

EN1649 DRIVER DALI

 

DALI DC/DC converter with one programmable constant current output.

EN1658 PUSHNAMIC

 

Tunable white and dim to warm controller from external push button/s. Tunable white function (two external push buttons): ON/OFF and dimming from button 1 - setting of the desired white tonality from button 2. Dim to warm function (one external push button): ON/OFF and dim to warm function from one external push button.

EN0995 Controller DMX

 

DMX controller for the control of lighting fixtures by DMX protocol.

EN1056 Converter DALI/DMX or DMX/DALI

 

Signal converter available in two versions: from DALI to DMX or from DMX to DALI.

Controller DMX

EN0757

  • ON/OFF and dimming through DMX protocol.
  • DMX chanel setting through Dip Switch.

EN1162 CONTROLLER DMX/RDM MINI

 

DMX/RDM controller for the control of lighting fixtures by DMX/RDM protocol.

EN1418 DMX Repeater

 

The repeater allows to extend the range of DMX signal in order to connect up to 31 devices more than the maximum quantity set by the line and more than the maximum cables lenght. The additional devices will be connected to the line generated by the repeater.

EN1576 OPTO-ISOLATOR DALI

Signal repeater and regenerator compatible with DALI-2 protocol complete of integrated power supply for the output DALI line.

It’s used to extend or/and to electrically isolate the digital input line from output line.

Sequencer

 

Controller for the selection of colors, colors cycle and desired speed from external push buttons and/or radio remote control. Possibility to connect more sequencers and synchronize them.

Mini sequencer

EN0800

  • Selection of colors, colors cycle and desired speed.
  • Settings are automatically stored and resumed at power on.
  • Control from extarnal buttons (not included).
  • It is not possible to connect more Mini Sequencers.

TUNABLE WHITE DIMMER

EN0723

  • Setting of the desired white color temperature
  • Setting of the desired brightness level.
  • Controller with soft start: when it is powered on/off, the output is gradually activated/deactivated.
  • Brightness and white CCT are automatically stored and resumed at power on.
  • Control from external buttons (not included) - radio remote control version available.

EN0832 TOUCH COLOR RGBW

 

Touchpad for the control of four outputs (RGB+W): color setting, brightness level, color cycle speed. Possible the control from two external push buttons. Ideal to be installed into 4-modules Vimar and BTicino mounting frames.

EN0871 TOUCH COLOR DMX

 

Touchpad for the control of four outputs (RGB+W) through DMX signal: color setting, brightness level, color cycle speed. Possible to connect more touchpads for a complex system management. Ideal to be installed into 4-modules Vimar and BTicino mounting frames.

EN1282

EN1282 Board for battery detach

EN1282 board has been designed to be integrated in battery-powered products. Specifically, at a certain voltage (set as standard at 10.5V - customizable value), it detaches the battery preserving it and allowing further recharges.

EN1259 DIMMER 0-10V

 

Dimmer for systems with 0-10V power supply. Connected directly to the 0-10V power supply, it makes possible to dim the light source from the switch in use, without structural interventions or cables.

EN1310 DIMMER DALI

 

Dimmer for systems with DALI power supply. Connected directly to the DALI power supply, it makes possible to dim the light source from the switch in use, without structural interventions or cables.

EN1848 PUSHDALI

 

DALI master-controller, complete of control input for an external push button and DALI compatible output, generates a DALI compatible signal to control in broadcast the DALI control gears applied to the output.

EN0832 TOUCH LIGHT 2CH

 

Touchpad for the control of two outputs (warm white and cold white): setting of the desired white color temperature, brightness level, four pre-setted programs. Possible the control from two external push buttons. Ideal to be installed into 4-modules Vimar and BTicino mounting frames.

EN1658 DALINAMIC

 

DALI controller for the control of two DT6 outputs or two DT8 outputs (tunable white function).

EN1688 IR OPTICAL TOUCH + DALI

 

Dimmer ideal for hospitality, as for example hotel rooms: through the IR buttons, guests can control the lamp (switch on/off/dim). Thanks to the DALI input, it is also possible a centralized management. The dimmer installs two IR backlit buttons, each IR button is associated to a dedicated DALI output and controls it individually.

EN1812 CASAMBI VOICE - DALI GATEWAY

DALI master-controller for the control of up to 64 DALI fixtures / 8 groups through CASAMBI App (BLE) and/or through vocal commands as it supports Amazon Alexa and Google Home vocal assistants (Wi-Fi).

Designed for A.A.G. Stucchi’s low voltage tracks (Multisystem - Evolution).

For programming, refer to the datasheet

EN1812 DALIGATE

DALI master-controller for the control of up to 64 DALI fixtures / 8 groups through CASAMBI or TUYA App (BLE).

Designed for A.A.G. Stucchi’s low voltage tracks (Multisystem - Evolution). For programming, refer to the datasheet.

EN1812 DALIGATE

EN1812 is an innovative Bluetooth-DALI interface ideal to be inserted in the A.A.G. Stucchi’s fin. Compatible with CASAMBI – TUYA Bluetooth systems, EN1812 device generates a DALI compatible signal to control, from mobile, up to 64 lamps / 8 independent groups. The control of the lamps/groups is done through the related App. Silvair, Xicato, Wisilica, Koolmesh version available soon.

EN1814 OPTO-ISOLATOR 0-10V 1-10V

Signal repeater and regenerator compatible with 0-10V 1-10V protocol, complete of integrated power supply for the output signal line.

It’s used to extend or/ and to electrically isolate the digital input line from output line.